With the current life, people are becoming more and more aware of safe production, and almost all of them are equipped with safety shoes or labor protection shoes. Today, Linyi labor insurance shoe manufacturers will show you the classification of labor insurance shoes.
1. Safety shoes. Safety shoes are also called anti-toe shoes, mainly to prevent objects from hurting the feet and toes. For example, when the roller is carrying heavy objects or loading and unloading materials, the heavy pipe hits the foot or unintentionally kicks out the sharp metal plate. The toe cap is lined with metal material, which has good impact resistance, high strength and light weight. Its strength and impact resistance should be tested, and standards can be used. Be careful to choose safety shoes of different strengths according to the working weight.
2. Insulated shoes. The role of insulated shoes is to minimize the risk of electric shock. Since current flows into the ground through the human body through the contact point when an electric shock is applied, not only insulating gloves but also insulating shoes require electrical work. According to the pressure range, there are several kinds of insulated shoes of 20kV, 6kV and 5kV, which must be selected according to the working range. Insulated shoes should be checked and maintained frequently. If they are wet or worn, they will not be protected.
3. Anti-static and conductive shoes. Anti-static shoes are suitable for preventing accidents caused by static electricity of the human body, and avoid accidental electric shock caused by 220V power frequency capacitors to the human body. Conductive shoes are used in places where fires or explosions that are more sensitive to human static electricity may occur. Some of these shoes are safety shoes and rubber shoes with antistatic or conductive soles. The entire shoe does not use metal to reduce friction and the possibility of fire. Test the resistance of the shoes from the beginning. Then regularly test to ensure that the maximum resistance of the shoe does not exceed the allowable value.
4. Steel-making shoes and shoe covers. These shoes are also called caster shoes, mainly to prevent foot burns. These shoes are pressure resistant and not easy to burn. The upper is made of oiled cowhide and canvas inlaid leather. The sole is made of tire-lined cowhide. In order to prevent scalds caused by molten metal splashing liquid, the high waist is easy to take off. Shoe covers and trouser legs can also be covered with shoe covers, which are mainly made of canvas, asbestos and aluminum film.
5. Rubber boots. According to its use, it has anti-acid boots, waterproof boots and oil-proof shoes. Acid-resistant and alkali-resistant boots are suitable for places where there are acids, alkalis and other corrosive liquids on the ground. They are made of acid and alkali resistant rubber, and there are also acid and alkali resistant trousers and boots for pants and boots. Waterproof boots are used for groundwater or splashing. The basic materials are rubber, waterproof boots for miners, special boots for aquatic products and transplant boots. Oil-proof shoes are used for oily work on the ground, made of rubber or polyethylene plastic, and have boots and shoes.
6. Cold-proof shoes. Suitable for wearing in cold and low temperature environments. It has cotton shoes, fur boots and felt boots. It has good insulation properties.
In addition to the above-mentioned labor protection shoes, there are also heat-insulating soles suitable for road workers in construction, and protection shoes suitable for strengthening the soles of construction workers to protect food and wine workers from moisture.
